立式泡沫泵的維護

立式泡沫泵的維護包括以下幾個方面：

1. 定期檢查泵的出口壓力、電流、軸承溫升及振動情況，按時填寫運轉記錄和設備巡檢記錄。

2. 定期檢查冷卻水的溫度及水量，并做好記錄。

3. 定期檢查油杯內是否充滿潤滑油，并按設備潤滑要求做好潤滑油的添加或更換工作。

4. 停用泵8h內必須盤車3~5圈，并做好記錄。

5. 檢查設備、工藝管線的動、靜密封點有無滲漏現象。

6. 定期（操作工每次現場巡檢）應檢查主機運轉是否平穩，有無異常聲音，各部連接螺栓與地腳螺栓有無松動現象，做好設備日常檢查維修記錄。

7. 及時處理發現的各種設備缺陷并做好記錄，處理不了的及時上報。

8. 做好設備的清潔工作。

Maintenance of vertical foam pump

Maintenance of vertical foam pump includes the following aspects:

1. Regularly check the outlet pressure, current, bearing temperature rise, and vibration of the pump, and fill in operation records and equipment inspection records on time.

2. Regularly check the temperature and quantity of cooling water, and keep records.

3. Regularly check whether the oil cup is filled with lubricating oil, and add or replace lubricating oil according to the equipment lubrication requirements.

4. Within 8 hours of stopping the pump, it is necessary to turn it for 3-5 turns and keep records.

5. Check for leakage at the dynamic and static sealing points of equipment and process pipelines.

6. Regularly (every on-site inspection by the operator), the host should be checked for smooth operation, any abnormal sounds, and any looseness in the connecting bolts and foundation bolts of each part. Daily equipment inspection and maintenance records should be kept.

7. Timely handle various equipment defects found and keep records. If unable to handle them, report them in a timely manner.

8. Clean the equipment properly.