Mapping of vertical foam pump impeller and pump body

The mapping of pump impeller and pump body is a detailed measurement and recording of various components of the pump, in order to understand their size, shape, position, and other information. This surveying and mapping is of great significance for the design, manufacturing, installation, and maintenance of pumps. Here are some suggestions for mapping the pump impeller and pump body:

1. Preparation work: Before conducting surveying and mapping, it is necessary to prepare measuring tools such as calipers, vernier calipers, micrometers, feeler gauges, level gauges, etc. At the same time, it is also necessary to ensure that the measurement environment is clean and stable, avoiding direct sunlight and strong vibrations.

2. Impeller mapping:

a. Use a caliper or vernier caliper to measure the diameter, length, wall thickness, and other dimensions of the impeller.

b. Use a micrometer or feeler gauge to measure parameters such as the number of blades, blade thickness, and blade spacing of the impeller.

c. Use a level gauge to check the installation levelness of the impeller.

d. Record all measurement data and draw detailed drawings of the impeller.

3. Pump body mapping:

a. Use a caliper or vernier caliper to measure the diameter, length, width, height, and other dimensions of the pump body.

b. Use a micrometer or feeler gauge to measure the wall thickness, hole diameter, hole spacing, and other parameters of the pump body.

c. Use a level gauge to check the installation levelness of the pump body.

d. Record all measurement data and draw detailed drawings of the pump body.

4. Data analysis: Based on the collected data, analyze whether the size, shape, position and other parameters of the pump impeller and pump body meet the design requirements. If there are any issues, communicate with the design personnel in a timely manner and make adjustments.

5. Surveying and Mapping Report: organize the surveying and mapping results into a report, including measurement data, analysis reports, drawings, etc. The report should provide a detailed description of the size, shape, position, and other information of the impeller and pump body for other personnel to understand and use.

6. Archive and Save: Archive and save surveying and mapping reports and drawings for future reference in design, manufacturing, installation, and maintenance work.